Manual for WinneX 5
chapter 2
11
Wake-Up On LAN (WOL)
Through the Wake-Up On LAN function, a wake event occurring from the network can wake up
the system. If this function is to be used, please be sure an ATX 2.01 power supply of which
5VSB line is capable of delivering 720mA and a LAN adapter which supports this function is used.
Then connect this header to the relevant connector on the LAN adapter, set “ Wake-Up by LAN/
Ring” as Enabled in the “ POWER MANAGEMENT SETUP” section of the BIOS. Save & exit, then boot
the operating system once to make sure this function takes effect.
Wake-Up On Internal Modem (WOM)
Through the Wake-Up On Internal Modem function, the system which is in the power-off status
can be powered on by a ring signal received from the internal modem. If this function is to be
used, be sure an internal modem card which supports this function is used. Then connect this
header to the relevant connector on the modem card, set “ Wake-Up by LAN/Ring” to Enabled
in the “ POWER MANAGEMENT SETUP” section of the BIOS. Save & exit, then boot the
operating system once to make sure this function takes effect.
Digital Audio Connector (CDLIN1)
CDLIN1 is a Sony standard CD audio connector, it can be connected to a CD-ROM drive
through a CD audio cable.
1
+5V standby
GND
Signal for waking up (active low)
1
+5V standby
GND
Signal for waking up (active high)
CDLIN1
GND
CD Left Channel
GND
CD Right Channel
