Manual for PlatiniX 2D series
Enable keyboard password power-on function (JKB)
The mainboard provides the advanced keyboard password power-on function. Be-
fore using this function, set JKB with pin1 & pin2 closed. Otherwise, set JKB with pin2
& pin3 closed for disabling.
Furthermore in order to implement this function, set POWER ON Function to Password
and enter the keyboard power-on password in the INTEGRATED PERIPHERALS section
of the CMOS SETUP. Save and exit, then power off your system. In this case, the power
buttons power-on function is disabled.
Note:
1. If using this function, 5VSB line of the power supply should be capable of
delivering enough current for all the devices connected to the keyboard
port, if not, you will be unable to power up the system using the keyboard.
2. If you set JKB with pin2 & pin3 closed, set POWER ON Function to BUT-
TON ONLY, dont set it to Password, or youll be unable to power up your
system by the keyboard or the power button.
3. If you encounter the above problems, clear CMOS and set the jumper pin2
and pin3 closed to disable the function,them power on the system by pushing
the power button,and set power on Fuction back to Botton Only.
JKB
JKB
1
2
3
1
2
3
Disable
Enable
(default)
Installation Instructions
