Manual for PlatiniX 2D series
1-2: pin1 & pin2 closed
2-3: pin2 & pin3 closed
Installation Instructions
JFS1
1
2
3
JFS0
1
2
3
Overclocking Jumper Setting (JFS0,JFS1)(optional)
Jumpers JFS0 and JFS1 provides users with CPU overclocking feature. The host bus
speed can be set as 66x4/100x4/133x4/200x4MHz or AUTO. If CPU FSB(front side bus)
is set as auto, the system detects the CPU FSB automatically. The table below is for your
reference.
Whether or not your system can be overclocked depends on your processors and memorys
capability. Whether the processor is bus ratio locked or unlocked should also be taken into
account. For bus ratio unlocked processor, this overclocking feature can be implemented
by setting FSB as 66x4/100x4/133x4/200x4MHz, meanwhile adjusting the bus ratio (mul-
tiplier) in CPU SpeedEasyII Setup in AWARD BIOS CMOS Setup and memorry.
You can also adjust the CPU frequency by running StepEasyII. We do not guarantee the
stability of the overclocking system.
Warning: Be sure your selection is right. CPU over speeding is dangerous! We
will not be responsible for any damages caused.
133x4MHz
66x4MHz
200x4MHz
(default)
CPU FSB
100x4MHz
AUTO
OPEN
(default)
OPEN
2-3
2-3
2-3
1-2
1-2
1-2
2-3
JFS0
JFS1
OPEN
