Manual for PlatiniX 2D series
Parallel Port, Serial Port Connectors (UART1, UART2)
The parallel port connector can be connected to a parallel device such as a printer.
The serial port UART1,2 connectors can be connected to a serial port device such as a
serial port mouse. You can enable/disable them and choose the IRQ or I/O address in
Integrated Peripherals from AWARD CMOS SETUP.
Line-in jack, Microphone-in jack, Speaker-out jack and MIDI/Joystick
Connector
(available on PlatiniX 2D-A/-AL, PlatiniX 2DI-A/-AL)
The Line-in jack can be connected to devices such as a cassette player or minidisc player to
playback or record. The Microphone-in jack can be connected to a microphone for voice
input. The Speaker-out jack allows you to connect speakers or headphones for audio
output from the internal amplifier.The MIDI/Joystick connector allows you to connect a
game joystick or a MIDI device.
Installation Instructions
MIDI/Joystick
Speaker out
Line in
Microphone in
Parallel Port
UART1
UART2
Chassis Security Switch (CHSSEC)
The connector connects to the chassis security switch on the case. The system can
detect the chassis intrusion through the status of this connector. If the connector has
been closed once, the system will record the status and indicate the chassis has been
opened. You can monitor or check this information from QDI ManageEasy(optional) soft-
ware.
GND
Indicate signal
CHSSEC