Chapter 4
4 - 9
ROM PCI/ISA BIOS (2A69JQ19)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management
:Disabled
** Reload Global Timer Events **
PM Control by APM
:No
IRQ [3-7,9-15], NMI
:Enabled
Video Off Method
:V/H SYNC+Blank
Primary IDE 0
:Disabled
Video Off After
:Standby
Primary IDE 1
:Disabled
MODEM Use IRQ
:NA
Secondary IDE 0
:Disabled
Secondary IDE 1
:Disabled
Doze Mode
:Disabled
Floppy Disk
:Disabled
Standby Mode
:Disabled
Serial Port
:Enabled
Suspend Mode
:Disabled
Parallel Port
:Disabled
HDD Power Mode
:Disabled
Reset key function
:Enabled
VGA Active Monitor
:Disabled
Soft-Off by PWR-BTTN
:Instant-Off
Resume by Ring
:Disabled
Resume by Alarm
:Disabled
F1
:Help PU/PD/+/- : Modify
** Break Event From Suspend **
F5
:Old Values (Shift)F2
: Color
IRQ 8 Clock Event :Disabled
F6 : Load BIOS Defaults
F7
:Load Setup Defaults
Figure-6 Power Management Setup Menu
The following pages tell you the options of each item and describe the
meanings of each option.
Item
Option
Description
•
Power
Management
Disabled
User Define
Global Power Management (PM) will be
disabled.
Users can configure their own Power
Management Timer.
Min Saving
Pre - defined timer value are used such that all
timers are in their MAX values
Max Saving
Pre - defined timer value are used such that all
timers are in their MIN value
•
PM Control
by APM
No
System BIOS will ignore APM when Power
Management is enabled.
Yes
System BIOS will wait for APM’s prompt before
it enters any PM mode e.g. Standby or Suspend.
Note: If APM is installed, and if there is a task
running, even the timer is time out, the APM
will not prompt the BIOS to put the system
