Chapter 3
3 -
1
Chapter 3
Chapter 3
MainBoard Connectors
MainBoard Connectors
This section lists all connector pin assignment and port description on the
main-board. The situations of the connectors and ports are illustrated in the
following figures. Before inserting these connectors, please pay attention to
the directions.
Connectors with Header
Connectors with Header
Power LED & Keyboard Lock Connector (KEYLOCK)
PIN NUMBER
FUNCTION
1
LED Anode
2
NC
3
LED Cathode
4
K.B. LOCK
5
GND
The LED will blink when system in green status.
Power Switch (POWER)
1. If you want to power up your system, push the button once which connected
to JP16.
2. If you want to power off your system, just
push once *
again the button.
*
Note
:
If you change “
soft-off by PWR-BTTN”
from default “
Instant-off”
to “
Delay
4 Secs”
in BIOS Setting, you will have to press the power button for more than
4 seconds before the system power down. For details, please refer to Page 4-9.
Hard Disk LED Connector(HD.LED)
1 2 3 4 5
J30
POWER
(JP16)
