Manual for P4N series
Introduction
USB Ports
"#"
USB 1.1 compliant
"#
Supports wake-up from S1 (suspend), S3 (Suspend to RAM,depend on device)
Onboard IDE
"#"
Supports Independent timing of up to 4 drives
"#"
Supports Ultra ATA 100/66/33, PIO mode
"#"
Two fast IDE interfaces supporting four IDE devices including IDE hard disks and CD
ROM drivers
Onboard I/O
"#"
One floppy port supporting up to two 3.5
″
or 5.25
″
floppy drives with 360K/720K/1.2M/
1.44M/2.88M format
"#"
Two high speed 16550 compatible UARTs (COM1/COM2/COM3/COM4 selective) with
16 byte send/receive FIFO
"#"
One parallel port supports SPP/EPP/ECP mode
"#"
Infrared interface
"#"
One Game Port
"#"
All I/O ports can be enabled/disabled in the BIOS setup
Onboard LAN (Available on P4N-L P4N-AL Mainboard)
#"
10/100 Mbit/sec Ethernet support
#"
10/100M LAN interface built-in on board
Onboard Audio(Available on P4N-A P4N-AL Mainboard)
"#"
AC97 2.1 Specification Compliant
"#"
Provides onboard Line-in Jack, Microphone-in Jack, Speaker-out Jack with onboard
amplifier and MIDI/Joystick Connector
AGP Interface
"#"
AGP Connector supports AGP 2.0 including AGP 4x data transfers
BIOS
"#"
Licensed advanced AWARD(phoenix) BIOS,with plug and play ready
"#"
Supports IDE CD-ROM or SCSI boot up
