Manual for P4N series
Item
Option Description
#"
Boot Up
O n
Keypad is used as number keys.
NumLock Status
Off
Keypad is used as arrow keys.
#"
Boot Up
High
Define Boot Up System Speed.
System Speed
Low
#"
Gate A20 Option
Normal
The A20 signal is controlled by the keyboard
controller.
Fast
The A20 signal is controlled by Port92.
#"
Typematic Rate
Enabled
Keystrokes repeat at a rate determined by the
Setting
Disabled
keyboard controller - when enabled, the typematic
rate and typematic delay can be selected.
#"
Typematic Rate
6~30
The rate at which character repeats when you
(chars/sec)
hold down a key.
#"
Typermatic Delay
250~1000
The delay before keystrokes begin to repeat.
(Msec)
#"
Security Option
Setup
Select whether the password is required every
System
time the system boot or only when you enter
setup.
#"
OS Select For
Non-OS2
Select OS2 only if you are running OS/2 operating
DRAM>64MB
OS2
system with more than 64MB of RAM.
#"
HDD S.M.A.R.T.
Enabled
Enable hard disk S.M.A.R.T. support.
Capability
Disabled
Invalidate this feature.
#"
Report no FDD
Yes
Report NO Floppy Disk Drive for WIN 95 to
for WIN 95
release IRQ6.
No
Do not report No Floppy Disk Drive for WIN 95.
#"
Small Logo(EPA)
Enabled
The EPA logo can be shown when system boots
show
up.
Disabled
Close this function.
#"
Show Bootup
Enabled
The logo will be shown automatically when
Logo
system boots up
Disabled
No logo appearson the screen.
#"
Flash Write
Enabled
This option is for protecting the system BIOS,
Protect
Disabled
when enabled, writing to BIOS area is to be
discarded.
BIOS Description
