Manual for P4N series
#"
Onboard/CNR
Auto
If a CNR Interface is enabled, the onboard LAN
""
LAN Selection
will be automatically disabled. Otherwise, the
onboard LAN is enabled.
Onboard
The onboard LAN is enabled.
Ext.CNR
CNR Interface is enabled.
#
IDE HDD Block
Enabled
Allow IDE HDD to read/write several sectors at
Mode
once.
Disabled
IDE HDD only reads/writes a sector once.
#
KBC input clock
6/8 MHz
Set the PS/2 Keyboard input clock as 6/8/12
12/16 MHz
/16MHz.
#
Power On
Button only
Power on by power button.
Function
Password
Power on with keyboard password.
#
KB Power ON
Enter
Enter keyboard password.
Password
#
Onboard FDC
Enabled
Onboard floppy disk controller is enabled.
Controller
Disabled
Onboard floppy disk controller is disabled.
#
Onboard
3F8/IRQ4,
Define the onboard serial port address and
Serial Port 1/2
2F8/IRQ3,
required interrupt number.
3E8/IRQ4,
2E8/IRQ3,
Auto
Onboard serial port address and IRQ are
automatically assigned.
Disabled
Onboard serial port is disabled.
#
UART Mode
Normal,
Set UART mode.
Select
ASKIR
IrDA
#
RxD, TxD Active
Hi, Lo/Lo, Hi
Default is recommended.
Lo, Lo/ Hi, Hi
#
IR Transmission
Enabled
Enable IR Transmission delay Function.
Delay
Disabled
Disable IR Transmission delay Function.
#
UR2 Duplex Mode
Half
Default is recommended.
Full
Item
Option Description
Chapter 3
