background image

56

Appendix

Appendix

Appendix

Appendix

Appendix

P4I865G/P/PEA User’S Manual

BootEasy

BootEasy technology enormously improves the long BOOT process time of
computers.Reducing the wait time every user has to suffer when starting their
computer. BIOS without BootEasy has to perform many routines every time
when the system starts, such as checking system core of the computer and
initializing system peripherals. Now with the BootEasy, BIOS will not run these
repetitive Processes any longer , PC can boot-up without any redundant waiting
for the displaying of starting OS. BootEasy is quite easy to use , choose the right
option in CMOS SETUP, ( refer to QDI Innovation features) it can be easily
booted quickly. BootEasy save all the information when PC first normally boot-
up, and it restores all the parameters for the system and thus let the PC boot
freely and rapidly.

Note:

1.   If the previous boot was not completed then BIOS will perform normal
      POST even the BootEasy was enabled.
2.   No matter BootEasy is enabled or not, The BIOS will perform normal POST
      when CMOS fail.

Summary of Contents for P4I865 PEA






















































































Reviews: