manualshive.com logo in svg

QDI P4I865 PEA, User Manual

Share
Download
QDI P4I865 PEA User Manual Download Page 57

Appendix

Appendix

Appendix

Appendix

Appendix

49

P4I865G/P/PEA User’S Manual

SpeedEasy

SpeedEasy is a powerful and efficient Easy Technology for PC DIY fans. It pro-
vides a friendly interface .The users can also realize in the BIOS setup the CPU
core voltage adjustability.

Procedures:

1.

Correctly insert your CPU.

2.

Plug in other configurations and restore the system.

3.

Switch on power to the system and press the <Del> key to enter BIOS
Setup.

4.

Enter <BOS Features>menu to set up the CPU speed.

5.

Save and exit BIOS Setup, your system will now boot successfully.

BIOS provides you with a set of basic values for your processor selection instead
of the jumper settings. The processor speed can be manually selected on the
<BIOS Features> menu screen.

    Warning: 

 

Do not set CPU frequency higher than its working frequency.

                           If you do, we will not be responsible for any damages caused.

Summary of Contents for P4I865 PEA






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands