QDI B1S/2000, Manual

Page: 38 / 63

Manual BrillianX 1S/2000
l
Swap Floppy Enabled Exchanges the assignment of A&B floppy drives.
Drive
Disabled The assignment of A&B floppy drives are normal.
l
Boot Up O n Keypad is used as number keys.
Numlock Status Off Keypad is used as arrow keys.
l
Gate A20 Normal The A20 signal is controlled by the keyboard controller
Option or chipset hardware.
Fast Default setting. The A20 signal is controlled by Port 92
or the chipset specific method.
l
Password Setting System The system will not boot and access to BIOS
Setup will be denied if the correct password is not
entered when prompted.
Setup The system will boot up, but access to BIOS Setup
will be denied if the correct password is not entered
when prompted.
l
OS Select For Non-OS2 If your operating system is not OS/2, please select
DRAM>64MB this item.
OS2 If system DRAM is more than 64MB and the operating
system is OS/2, please select this item.
l HDD S.M.A.R.T Enabled Enables S.M.A.R.T hard disk support.
Capability Disabled Invalidates this feature.
l
Video BIOS Enabled Video BIOS will be copied to RAM. Video Shadow
Shadow will increase the video speed.
Disabled Video shadow is disabled.
l
C8000~CBFFF Enabled Optional ROM will be copied to RAM by 16K bytes
Shadow: per unit.
DC000-DFFFF
Shadow:
Disabled The shadow function is disabled.
l Show Bootup Enabled Enables the logo when system boots up
Logo Disabled Logo will not be shown when system boots up.
l
Flash Write Enabled Does not allow you to upgrade the BIOS.
Protect Note:Enabling this item can protect the system BIOS
from being attacked by severe virus such as CIH.
Therefore disable this item only when wanting to
flash BIOS, afterwards set this item as Enabled
(Default).
Disabled Disabling this item allows you to upgrade the BIOS.
35
Chapter 4