QDI B1S/2000, Manual

Page: 42 / 63

Manual BrillianX 1S/2000
DPMS This function is enabled only for the VGA card
supporting DPMS.
Note: When the green monitor detects the
V/H-SYNC signals, the electron gun will be
turned off.
l
Video Off After N/A System BIOS never turns off the screen.
Suspend Screen blanks after the system enters Suspend mode.
Standby Screen blanks after the system enters Standby mode.
Doze Screen blanks after the system enters Doze mode.
l
Doze mode Disabled The system never enters Doze mode.
1Min ~ 1 Hr Defines the continuous idle time before the system
enters Doze mode. If any items defined in ‘ Reload
Global Timer Events’ are On and activated, the
system will be woken up.
l Standby Mode Disabled 1 The system never enters Standby mode.
Min ~ 1Hr Defines the continuous idle time before the system
enters Standby mode. If any items defined in
‘ Reload Global Timer Events’ are On and activated,
the system will be woken up.
l
Suspend Mode Disabled The system never enters Suspend mode.
Min ~ 1Hr Defines the continuous idle time before the system
enters Suspend mode. If any items defined in
‘ Reload Global Timer Events’ are On and activated,
the system will be woken up.
l HDD Power Disabled HDD’ s motor will not be off.
Down 1 ~15 Min Defines the continuous HDD idle time before the
HDD enters the power saving mode (motor off).
l HDD Down Enabled HDD’ s motor will be off when the system enters
W hen suspend suspend mode.
Disabled HDD’ s motor will no be off.
l Throttle Duty 12.5% Selects the duty cycle of the STPCLK# signal ,
Cycle 25% slowing down the CPU speed when the system
37.5% enters the green mode.
50 %
62.5%
75%
87.5%
l PCI/VGA Act Enabled VGA active reloads global timer.
-Monitor Disabled VGA active has no influence to global timer.
l Soft-Off by Instant-Off The system will power off immediately once
PWR-BTTN the ‘ Power’ button is pressed.
Delay 4 Secs The system will not power off until the ‘ Power’
button is pressed continuously for more than 4
seconds.
39
Chapter 4