QBD COOLING SYSTEMS INC.
9
08 -2015
47-0480-192-N
8.
ELECTRICAL SAFETY INSTRUCTIONS
WARNING
•
Have the wall outlet and circuit checked by a qualified electrician to make sure that the outlet is
properly grounded and circuit breaker is in place as cooler manufacturer recommendation and/
or as per local, regional or national standard.
•
Plug the cooler into a dedicated, 3prong electrical receptacle only.
•
Don’t cut or remove the ground prong from the power cord.
•
Don’t cut or remove the ground prong from the power cord. For electrical safety the cooler must
be properly grounded.
•
Always connect to a dedicated electrical circuit and ensure the voltage rating of the circuit is
same as mentioned by manufacturer.
•
Don’t use a power cord having cracks or abrasion mark.
•
All coolers are supplied with an appropriate power cord based on amperage requirements. If
power cord need to be relocated for desired application the electrical work must be performed
by a certified electrician and as per the or as per local, regional or national standard.
CAUTION
•
Don’t use extension cord, power bars and/or adapter to power the cooler.
•
Periodic inspection of all electrical components is recommended and never use any damaged
electrical component.
•
Always disconnect power to cooler before cleaning or performing any service.
•
QBD recommends
NEMA PLUG & RECEPTCLE
to be used with coolers.
•
ALWAYS USE OEM PARTS FOR REPLACEMENT