QBD COOLING SYSTEMS INC.
8
08 -2015
47-0480-192-N
7.
SAFETY INSTRUCTIONS DURING INSTALLATION AND USAGE
WARNING
Use cooler for its intended use only as mentioned by manufacture.
This cooler must be properly installed and located in accordance with the installation instruction
before it is used. Improper installation of the cooler, electrical components may cause poor
performance and / or component failure. QBD will not be responsible for equipment or
component failure or the other damages or losses that arise as a result of improper installation.
Coolers must be powered at proper operating voltages at all times. The supply voltage should be
within 10% of the nameplate voltage rating. QBD is not responsible for the repair or replacement
of failed or damaged components resulting from electrical power failure, incorrect supply
voltage, low voltage or unstable supply voltage.
Don’t install cooler where storage, handling and / or dispensing of flammable and / or explosive
material may occur.
Keep all the packing material away from children and animals and dispose them safely and
securely as per local, regional or national disposal standard.
Always disconnect the power to cooler and electrical condensate pan (if applicable) before
cleaning or performing ant service.
Use best practices when removing shipping platform and brackets, leveling the cooler while
moving the cooler from one place to another.
Use best practices while handling or cleaning metal parts in cooler.
Improper shelf clip installation may cause shelf and / or product to fall which could result in
personal injury or damage to cooler.
Overloading the shelves could result in personal injury damage to cooler.
Don’t push the cooler against the side glasses when removing from the skid or relocating the
cooler. Doing so might result in personal injury or damage to cooler.