5
STEP 4 - Hub initialisation
When the hub powers up, you will see a sequence of flashing LEDs on the
front.
After three minutes the flashing LED’s will stop and you will be left with a
solid red LED next to the Standby button.
If a solid red LED is not shown please refer to the full manual available
on-line at www.qacoustics.co.uk/brochures.
Pair your remote by holding the ‘Remote pair’ button on your remote until
the remote LED on the hub stops flashing and turns solid white (ensure 2 x
AAA batteries supplied are fitted).
Remote pair
