Q-See QT504, User Manual, Page: 24 / 34

46 47
CHAPTER 4 MAIN MENU SETUP
And, selecting Setting will bring up the
camera view along with a control panel to
program the camera’s motion.
The dome’s rotation can be controlled vertically, horizontally and diagonally along with its
speed. The lens zoom, focus and iris (light level) can be set as well. Select the number for this
program and click the
Save button to save the settings. You can hide the control panel by
clicking on the “ - ” button or right-clicking on the screen. The control panel can be unhidden by
right-clicking on the screen again. The X button will exit the control interface.
PICTURE 4-45
PICTURE 4-46
PICTURE 4-47
Name Symbol What it Does
Add
Opens a window to allow the user to set the speed and time of a new preset point
Delete Deletes a preset point
Modify
opens the settings window for the selected preset point allowing you to change
the settings
Arrows
Enables the user to alter the position of a setting in the cruise order.
Move a preset point all the way to the top of the order
Move a preset point up one position in the list
Move a preset point down one position in the list
Move a preset point to the bottom of the order
Cruise
Selecting a Setting button from the Cruise column will open the Cruise window.
Select Add or double-click on an existing line
to modify and the CRUISE PRESET window
will open.
Delete will remove a selected cruise line
Clear All will remove all of the cruise lines.
The set of icons to the right of the screen are
used to configure each cruise setting.
Preview – Preview the cruise to ensure that
you have the desired results.
The user can control the dome’s rotation direction, plus speed as well as the zoom, focus and
iris.
Start Record
– The system will begin recording the sequence of movements you perform on
the PTZ control panel. Clicking this again will stop the recording.
Start Track
– This will play back the tracking sequence you just recorded. Clicking on this
button again will stop the playback.
PICTURE 4-48
Track
This interface is used to program the tracking routine for the camera. Clicking on the Track
button will bring up the live view for that camera plus a control panel: