background image

98

99

MOTION

Motion Tab

As with the 

Alarm

 function above, it incorporates hold time and can trigger procedures. 

Select which cameras you wish to start recording on motion detection. Set the holding time 
which determines the length of time the cameras continue recording after motion stops. 

 

To Record

 allows you to determine which cameras will begin recording. Cameras can 

be set to record individually, in blocks, or all cameras can be activated.

 

To PTZ

 activates preset, cruise or track functions on selected Pan-Tilt-Zoom 

cameras. Depending on your model of PTZ camera, one of up to 128 pre-set actions 
can be engaged. Check your camera’s manual for details.

Schedule Tab

Set by default to always on, the schedule can be altered in the same manner as that used in  

Schedule

 in 

SECTION 4.4

.

PICTURE 8-6

PICTURE 8-7

PICTURE 8-8

In the 

Trigger

 setting, you can set multiple 

channels to record when motion is detected 
by a camera that has been set to activate 
upon motion detection.

For example:

 If Camera 1 detects motion, 

you can have it trigger Cameras 2 and 3 to 
begin recording as well.

In addition, the user can set the sensitivity of certain areas within the field of view by clicking 
on the 

Select

 button selecting the 

Area

 field for the respective camera. 

Specific areas can be made sensitive by 
applying a blue grid to the desired section of 
the screen. The blue grid can be applied to 
the entire screen – signifying that the entire 
field of view is sensitive - by clicking on 
the 

star button

. The 

trash can

 button will 

remove the grid completely. Click and drag 
with the mouse on the screen to draw or 
erase the grid in select areas. 

Sensitivity: 6

Sensitivity: 6

 As sensitivity is influenced by color and light level, you can adjust its values according to your 
specific conditions. The default value is “4.” A setting of “8” is most sensitive while a setting of 
“1” is minimally sensitive. 
Right-clicking in the screen will show or hide the control menu at the bottom of the screen.

VIDEO LOSS

In the event that signal is lost by one camera, others can be activated to record while 
additional devices can also be triggered.

Test your settings by moving something 
or someone through the grid area in the 
camera’s view. Motion should not be detected 
outside of this area but you should see a 
yellow humanoid figure appear in the screen 
once the DVR detects movement within the 
grid. Removing the grid where there is a flag 
or trees that frequently move in the wind will 
prevent false alerts. Click on the 

Disk

 button 

to save your settings before exiting the setup 
process by clicking on the 

X

 button.

Schedule Tab

This is also set to be on all the time by default and it can be adjusted in the same manner as 
the 

Schedule

 configuration in 

SECTION 4.4.

PICTURE 8-9

PICTURE 8-10

PICTURE 8-11

PICTURE 8-12

Like the 

Trigger

 tab in the 

Alarm Handling

 

section of the 

Sensor

 menu, you can select 

the events that you wish to occur in the 
event that a video input is lost. Both Alarms 
and PTZ events can be scheduled as in the 

Sensor

 menu above.

OTHER ALARM

In this menu you can set the DVR to alert you to a full Hard Drive, IP Conflict on the network or 
a Disconnection. 

You can set the response as well as at what 
threshold of remaining disk space you wish to 
be alerted.

Sensitivity: 6

Sensitivity: 6

Summary of Contents for QT SERIES




























































Reviews: