DEVICE OPERATION
Model #: QS218
18 |
P a g e
Audio Settings:
In your Multimedia player interface, go to the Setting menu on your toolbar. From there, go to
Setting
Audio Channel Setting
Normal Video Bar (Figure 3.5.13). This will open up a dialog as illustrated in
Figure 3.5.14 allowing you to choose from a drop down list of which audio channels to play. Make your choice from
the options provided in the drop down list and click
next to “The channel has sound data”. Click Apply then OK.
Please note that these setting changes will not take effect until you re-start your multimedia player.
3. RECORD MODE
Configure record parameters, enable/disable audio.
NOTE: Audio capable cameras or powered microphones (not included) are required for audio recording.
Figure 3.5.15
To configure recording options:
1) Under
CHANNEL
, use the drop-down menus and select
ON/OFF
to enable/disable recording for the selected
channel.
2) Under
QUALITY
, Select
BEST
,
FINE
, or
NORMAL
, Setup code rate for recording corresponding to
768
Kbps,
512
Kbps and
384
Kbps.
3) Under
AUDIO
, select
ENABLE
or
DISABLE
. If audio recording is enabled, the system will record audio from
connected audio capable cameras (not included)
Figure 3.5.14
Figure 3.5.13
