DEVICE OPERATION
Model #: QS218
7 |
P a g e
3.2 REMOTE CONTROL
The remote control is the secondary input device
For navigating the system’s menus.
To use the remote control:
1.
STANDBY
: Press to turn standby mode ON/OFF.
2.
LOGIN/LOCK
: If "Security" has been enabled in the
Setup menu, press to open the user password login
screen.
3.
Number/Channel buttons
: While in menus,
press buttons 0~9 to enter values; during live
viewing, press to view channels full-screen.
4.
: Press to switch between quad and
full-screen displays.
5.
MENU
: Opens the main menu.
6.
PTZ
: Press to open the PTZ control window.
7.
EXIT
: Close menu windows.
8.
Navigation/OK
:
/
CH+
: Move cursor in menus up; Channel Up.
/
FWD
: Move cursor in menus to the right; during
playback, increase forward playback speed (5X, 15X,
60X).
/
REW
: Move cursor in menus left; during playback
increase reverse playback speed (5X, 15X, 60X)
/
CH-
: Move cursor in menus down; Channel down.
OK
: In menus, press to confirm selections; during
playback and preview, press to view system
information
9.
+
/
-
: In menus, press to adjust values.
10.
RECORD
: Press to start manual recording.
11.
STOP
: Press to stop manual recording.
12.
EXTRA
: For future use.
13.
Playback controls
:
•
: Increase reverse playback speed 1X, 2X, 4X
•
: Press to start playback
•
: Press to increase forward playback speed 1X, 2X, 4X
•
: Press to slow playback speed by 1/2, 1/4, 1/8
•
: Press to freeze playback to one frame, then press again to advance frame-by-frame
TIP
: When using the remote control to
enter password and camera titles, select
the field using the navigation buttons,
press ENTER, and then press the number
buttons.
