16
17
Clicking on
POS
will open a new window to allow you to position the name anywhere on the screen (space permitting). Simply
move the name around the screen using the multi-function button. Clicking the multi-function button will return you to the ID setup
window.
SYNC
The camera is internally synchronized and this cannot be changed.
LANGUAGE
Select your preferred language; English, Spanish, French, Russian, Portuguese, German, Chinese and Japanese.
CAMERA RESET
This allows you to reset the camera back to factory default settings.
CAMERA ID
You can enter an identifying name for your camera that will appear over the video image if you so choose. This will appear in addition
to any similar identification made using a DVR. You can enter two lines of text with up to 26 characters each. Currently, only one such
identification field - CHR1 - is supported.
To enter text, use the multi-function button to navigate
to the desired character and then press the button to
enter it and the cursor will advance to the next position
in the name. The arrow buttons will allow you to move
the cursor within the camera name including to the
next line. Spaces can be entered using the
CLR
button or the right arrow button.
IMPORTANT!
After making changes to the settings, select
SAVE ALL
to retain these in
the camera in the case of power failure.
CAMERA ID
CAMERA
ABCDEFGHIJKLMNOPQRSTUV
WXYZ0123456789-!”#$%&’
()_`,¥:;<=>?@\^*.x+/
CHR1 CHR2
CLR POS
RETURN
TROUBLESHOOTING
Problem
Solution
No picture or unstable image
Check both the power and video connections to the camera.
The on-screen image is blurry.
1. Check the camera focus.
2. Check for fingerprints or dirt on the lens.
3. Check menu settings.
The on-screen image is dim.
1. Check for fingerprints or dirt on the lens.
2. Check monitor settings
3. Check camera SHUTTER/AGC settings.
The on-screen image is dark.
1. Adjust the monitor contrast settings.
2. Adjust camera SHUTTER/AGC settings.
The on-screen image color is incorrect.
Check camera WHITE BAL setting.
The on-screen image has a lot of noise.
1. Check camera Noise Reduction settings
2. Check camera auto gain setting in SHUTTER/AGC menu.
No motion detection or privacy frames.
Check whether those settings have been enabled.
The screen flickers.
Camera may be facing sun, television or computer monitor.
The IR LEDs will not light up
1. Check the power connection to the camera.
2. Power supply may need to be located closer to camera.
3. Change DAY/NIGHT mode on camera to AUTO or B/W mode
The camera is not working properly, is hot, smells or is
producing smoke.
DISCONNECT CAMERA FROM POWER SUPPLY
IMMEDIATELY!
1. Check that correct power supply is in use.
2. Send camera out for repair.
