19
Assembly and installation manual
QIM/QDB Mixer Series
QIM/QDB-M01
6. ASSEMBLING THE QDB
6a. Identify the elements that conform the standard QDB assembly. Figure 1.
6b. Check that the QDB table (T) has installed the wheels (W) and is clear for assembling
the QIM (Q) on it. If the wheels are not installed, then install them. Assembly the QIM to
the motor (M). Follow the instructions described on sections 2 thru 5 to do this. Figure 2.
(C) – Clamp assemblies (x 3 pieces)
(G) – Clamp Gaskets (x 3 pieces)
(H) – Hopper
(M) – Motor
(Q) – QIM (In-Line Mixer)
(T) – Table
(T1) – Hexagonal screws (x 4 pieces)
(T2) – Hexagonal nuts (x 4 pieces)
(T3) – Hexagonal screws (x 2 pieces)
(T4) – Hexagonal nuts (x 2 pieces)
(V) – Ball valve
(W) – Wheels (x 4 pieces)
(Y) – Y-elbow
Figure 1.
Figure 2.
A
SS
EM
B
LY
M
Q
Y
V
H
C
G
W
T1
T3
T4
T
T2
