11
Assembly and installation manual
QIM/QDB Mixer Series
QIM/QDB-M01
For NEMA motors “C” face and IEC motors “C DIN” face (B14 flange) and “C” face (FC
flange) use the four hexagonal screws (71B). Figure B.
For IEC motors “FF” face (B5 flange) use also the hexagonal nuts (71C). Figure C.
2. ASSEMBLY THE ADAPTER TO THE MOTOR
Place the stainless adapter (71) on the motor flange and fix it with hexagonal screws and
tighten to the torque values recommended in Chart 1.
Figure B.
Figure C.
A
SS
EM
B
LY
Chart 1 – Torque values for tightening the adapter screws
Torque ft-lb
Models NEMA
Models IEC
20
Frame 56 to 14
Frame 80 to 90
55
Frame 18 to 25
Frame 110 to 160
70
Frame 28
Frame 180
110
Frame 32 to 36
Frame 200 to 225
