Q Imaging Retiga R Series User Manual Download Page 2

Page: 2 / 29

www.qimaging.com

RETIGA R

™

SERIES USER MANUAL

Applicability

This document applies to the QImaging RETIGA R6, RETIGA R3, and RETIGA R1 R Series cameras. For the latest
updates, please visit

www.qimaging.com

Notice of Copyright

Copyright © 2015 Quantitative Imaging Corporation. All rights reserved. Unauthorized duplication of this
document is prohibited.

Trademarks and Proprietary Names

QImaging, RETIGA R6, RETIGA R3, and RETIGA R1 are trademarks of QImaging. PVCAM

is a registered

trademark of Roper Scientific, Inc. Product names mentioned in this document may be trademarks or registered
trademarks of QImaging or other hardware, software, or service providers and are used herein for identification
purposes only. Microsoft

and Windows

are registered trademarks in the U.S. and other countries of Microsoft

Corporation and are used herein for identification purposes only.

QImaging Corporation Address Information

19535 56th Avenue,
Suite 101
Surrey, BC, Canada V3S 6K3
604.530.5800

www.qimaging.com

QImaging Technical Support

Technical support is available to all registered users of QImaging products from 6am to 5pm Pacific Standard
Time.

[email protected]

800.874.9789

http://www.qimaging.com/support/contact

Summary of Contents for Retiga R Series




























Search results

Summary of Contents for Retiga R Series

Reviews:

Related manuals for Retiga R Series

Brands by name

Popular brands

Q Imaging Retiga R Series, User Manual

Search results

Summary of Contents for Retiga R Series

Reviews:

Related manuals for Retiga R Series

Brands by name

Popular brands