Once the IEEE 1394 card is installed in your computer, you are ready to install the
FireWire drivers and imaging software. See your Imaging Software User’s Guide for
Once your imaging software and camera driver is installed, connect the camera to the computer.
In most cases, the FireWire cable provides the necessary power required for the QIClick
for complete installation instructions.
Camera drivers and the QCapture Suite imaging software are available online at
www.qimaing.com
Connecting the camera to a PC/MAC desktop Computer
Perform the following for connecting your camera.
•
Remove the FireWire cable from the camera box, and plug one end of the cable into one
of the camera’s FireWire sockets (either socket is fine).
Figure 3—
Camera FireWire Sockets.
•
Plug the other end of the cable into a FireWire port on your computer
FIREWIRE PORTS
Camera
Computer
Figure 5—
6-pin to 4-pin FireWire (IEEE 1394) Port connection
Camera
Computer
Figure 4—
6-pin to 6-pin FireWire (IEEE 1394) Port connection
4
Step 2. Install Your Imaging Software
Step 3. Connect the QIClick
