3
The QIClick connects to your Windows PC via a FireWire port. Even if you already have a
FireWire port, you need to install the supplied IEEE 1394 PCIe card.
IMPORTANT: Follow these steps in order to complete the installation.
DO NOT CONNECT the camera until the camera driver is installed.
1. Install the provided IEEE 1394 PCIe card
2. Install the software and drivers needed to acquire images with your new
QImaging camera.
3. Connect the QIClick to your computer using the supplied IEEE 1394 cable
DO NOT CONNECT the camera until you have a functioning FireWire port in
your computer and the camera driver is installed.
5
Install the supplied IEEE 1394 PCIe card:
•
Shut down your computer.
•
Open the case, and install the supplied IEEE 1394 card into an empty PCIe slot. See the user’s
manual for your computer for complete instructions on installing new PCIe cards.
•
Restart your computer. Windows should automatically install the appropriate software
drivers for the card.
CHAPTER 2
INSTALLATION
Step 1. Install the IEEE 1394 PCIe Card
