Q-Free
ITS-950 ParQSense Base station Installation Manual
Page 9 of 12
5. Attach back plate using hardware to installed anchors.
6. Reattach ITS-950 ParQSense Base Station to back plate.
7. Plug in the outdoor rated Cat5 cables using an outdoor rated connected to the ITS-950
ParQSense Base Station
8. Check for connectivity and activity on the Status Lights on the bottom of the unit near the Cat5
connection.
4.3
Status lights
Indicator
Appearance
State
Power
Red ON
Valid power level on secondary side
PHY connection status
Green ON
External network wiring OK
Network communication status
Red flash
Cellular activity
Green flash
Ethernet activity
Blue flash
Bluetooth activity
Device health status
Blue flash
Bootloader is running
Yellow ON
Hardware is initialized
Yellow flash (0.5 second)
Firmware is being initialized
Yellow flash (1 second)
Firmware is running normally
Alternating red/green flash
Ethernet driver failed to initialize
