Q-Free
ITS-950 ParQSense Base station Installation Manual
Page 10 of 12
5 INSTALLATION VALIDATION
5.1 Testing
For testing of the ITS-420 ParQSense Standard Outdoor Sensors communication to the ITS-950
ParQSense Base Station, refer to the ITS-420/421 ParQSense Outdoor Sensor Installation Manual.
Any necessary adjustments to the default settings of the ITS-950 ParQSense Base Station can be made in
the ParQSense backend software system.
6 FCC DECLARATIONS
6.1 Modification Statement (§15.21)
Changes or modifications to the equipment not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
6.2 Compliance Statement (§15.19)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
6.3 RF exposure statement, for outdoor Mobile device (§2.1091)
To comply with FCC/IC RF exposure limits for general population / uncontrolled exposure, the antenna(s)
used for this transmitter must be installed on outdoor permanent structures to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with
any other antenna or transmitter.
6.4 FCC Class A Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
This equipment is not intended for residentiual use and shall only to be sold to professional customers.
6.5 Modular devices
This device contains:
FCC ID: XPY1CGM5NNN
FCC ID: T7VPAN10
