4
5
INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.POWER-G5 / L-G5 • Q.PRIME-G5 / L-G5 – EN
INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.POWER-G5 / L-G5 • Q.PRIME-G5 / L-G5 – EN
Validity
These instructions are only valid for crystalline solar
modules from the company Q CELLS. Q CELLS assumes
no liability for damage resulting from failure to observe
these instructions.
Ä
Please observe the wiring and dimensioning of the
system.
Ä
The installer of the system is responsible for compliance
with all necessary safety regulations during set-up and
installation.
Q CELLS assumes no liability on the basis of these
instructions. Q CELLS is only liable in the context of
contractual agreements or in the context of accepted
guarantees. Q CELLS accepts no other responsibility for
the functionality and safety of the modules.
Ä
Please observe the instructions for any other sys-
tem components that may be part of the complete
solar power system. It may be necessary to carry out a
structural analysis for the entire project.
Additional information for the Operator
Ä
Please keep this manual for the entire life of the solar
power system.
Ä
Please contact your system supplier for information
concerning the formal requirements for solar power
systems.
Ä
Please be sure to contact the relevant local authorities
and energy providers regarding regulations and permit
requirements prior to installation of the solar power
system. Your financial success depends on the fulfillment
of these requirements.
Other applicable documents
In addition to this Manual following technical information
are relevant:
DOCUMENT TYPE
Product data sheet
Packaging and transport information
Cleaning manual
1 INTRODUCTION
2.1 Technical specifications
2 PLANNING
Fig. 1:
External dimensions (in mm) and components for Q.PRIME L-G5.1, Q.POWER L-G5.1
C-SI MODULES (L) FOR DATA SHEETS
EN
≥
1200 mm
991mm
1308 mm
1972 mm
Junction bo×
4 × Mounting slots (DETAIL A)
8 × Drainage holes
Cable with
connectors
Frame
4 × Grounding holes, Ø 4.5 mm
941 mm
4 × Drainage holes
332 mm
DETAIL A
16 mm
8.5 mm
25.5 mm
40 mm
Label
400 mm
4 × Mounting slots system Tracker (DETAIL B)
DETAIL B
10 mm
7 mm
25 mm
Additional information can be found in the currently valid data sheets available at www.q-cells.com.
PRODUCT LINE
Q.PRIME L-G5.1
Q.POWER L-G5.1
Type
Monocrystalline
Polycrystalline
Length
1972 mm
1972 mm
Width
991 mm
991 mm
Frame height
40 mm
40 mm
Weight
23 kg
23 kg
Max. system voltage V
SYS
[V]
1000 (IEC) /
1500 (IEC)
1000 (IEC) /
1500 (IEC)
Max. fuse rating [A]
20
20
Permissible
temperature range
–40 °C to +85 °C
Junction box protection class
IP67 or IP68, with bypass diodes
IP67 or IP68, with bypass diodes
Connector protection class
IP68
IP68
Fire protection class
C
C
Snow load
[Pa
1
]
5400
5400
Wind load
[Pa
1
]
2400
2400
Certificates
CE-compliant; IEC 61515 (Ed.2) see page 8; IEC 61730 (Ed.1)
Application Class A
1
Test-load in accordance with IEC 61215
12 mm
40 mm
35 mm
19.3 mm
L-G5.1
25.05 mm
8.5 mm
5.1 mm
