background image

4

5

INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO XL-G9.2 – Q CELLS

INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO XL-G9.2 – Q CELLS

Validity

These instructions are only valid for crystalline solar modules from 
the company Q CELLS as specified at chapter „2.1 Technical 
Specifications“. 
Q CELLS assumes no liability for damage resulting 
from failure to observe these instructions.

 

Ä

Please observe the wiring and dimensioning of the system.

 

Ä

The installer of the system is responsible for compliance with all 
necessary safety regulations during set-up and installation.

Q CELLS assumes no liability on the basis of these instructions. 
Q CELLS is only liable in the context of contractual agreements 
or in the context of accepted guarantees. Q CELLS accepts no 
other responsibility for the functionality and safety of the modules.

 

Ä

Please observe the instructions for any other system compo-
nents that may be part of the complete solar power system. 
It may be necessary to carry out a structural analysis for the 
entire project.

 

Ä

If your questions are not satisfactorily answered in the manual, 
please contact your system supplier.

Additional information for the Operator

 

Ä

Please keep this manual for the entire life of the solar power 
system.

 

Ä

Please contact your system supplier for information concerning 
the formal requirements for solar power systems.

 

Ä

Please be sure to contact the relevant local authorities and 
energy providers regarding regulations and permit requirements 
prior to installation of the solar power system. 

Other applicable documents

In addition to this Manual following technical information are 
relevant:

DOCUMENT TYPE

Product data sheet

Packaging and transport information

MISUSE OR INCORRECT USE OF SOLAR MODULES VOIDS 
THE LIMITED WARRANTY AND MAY CREATE A SAFETY 
HAZARD AND RISK PROPERTY DAMAGE. THIS INCLUDES 
IMPROPER INSTALLATION OR CONFIGURATION, IMPROPER 
MAINTENANCE, UNINTENDED USE, AND UNAUTHORIZED 
MODIFICATION.

For additional information see the relevant datasheet of the module provided at www.q-cells.com.

PRODUCT LINE

Q.PEAK DUO XL-G9.2

Type

Q.ANTUM DUO

Length

2163 mm

Width

1030 mm

Frame height

35 mm

Area

2.23 m²

Weight

26.0 kg

Max. system voltage V

SYS

1500 V

Max. reverse current

20 A

Permissible 

temperature range

–40 °C to +85 °C (–40 °F to +185 °F)

Junction box 

protection class

≥ IP67 with bypass diode

Connector protection class

IP67 or IP68

Fire rating based on 

ANSI / UL 61730

C / Type  1

Max. test load Push / Pull

1

5,400 Pa / 2,400 Pa

Max. design load Push / Pull

1

3,600 Pa / 1,600 Pa

Middle rail

Yes

Certificates

CE-compliant; IEC 61215:2016; IEC 61730:2016; PV module classification: Class II

1

 Test and design load in accordance with IEC 61215:2016, depending on mounting options (see section „2.3 Mounting Options“)

1  INTRODUCTION

2  PLANNING

2.1  TECHNICAL SPECIFICATIONS

Fig. 1: 

External dimensions (in mm) and components 
for Q.PEAK DUO XL-G9.2

AU/
EN

1030 mm

1308 mm

2163 mm

35 mm

4 × Mounting slots (DETAIL A)

Frame

979 mm

428 mm

Label

4 × Grounding holes,
Ø 4.5 mm

400 mm

8 × Mounting slots system Tracker (DETAIL B)

980 mm

790 mm

≥ 700

 mm

≥ 350

 mm

8 × Drainage holes

3 × 6 mm  

4 × Drainage holes

DETAIL A

16 mm

8.5 mm

25.5

 mm

DETAIL B

10 mm

7 mm

25

 mm

Summary of Contents for Q.PEAK DUO XL-G9.2 Series













Reviews: