background image

mounting is also possible.

1030i and 1050i

An optional bracket designed specifically to wall mount the Q Acoustics 

The 1030i and 1050i loudspeakers should be positioned at least 200mm 

1010i, 1020i and 1000Ci is available from your dealer. Floor stands for the 

from a back wall and 500mm from the side walls. Placing the speakers 

1010i and 1020i are also available.

closer to the wall will increase bass but could cause the sound to boom 
and lack precision and detail. The speakers should be 2m - 4m apart and 

Be prepared to experiment to find the best setup for your taste in your 

central to the seated listener. Turning the speakers slightly inwards will 

particular listening room.

sharpen a stereo image but may cause narrowing of the sound source.

Effects loudspeakers

1000Ci

The 1000Ci is designed to be operated close to a TV screen and central 
to it. It should be placed immediately above or below the screen. If you 
are using a regular TV set, make sure that the TV is capable of adequately 
supporting the speaker and has a level top. If not, consider placing the TV 
on a cabinet with the 1000Ci on a secure shelf immediately below the TV.

If you have a Plasma or LCD monitor, mount the 1000Ci to the wall or 
other suitable surface immediate ly above or below 
the screen. 

Surround Speakers

There  are  recommendations  from  Dolby  labs  for 
5.1 effects speakers. 

1010i and 1020i

Surround speakers should be mounted on either 

The 1010i and 1020i are ideally mounted on Q-Acoustics floor stands or 

side  of  the  listener,  slightly  behind  the  listening 

wall mounted. If you are stand mounting, a simple guide is that the treble 

position.  The  speakers  should  be  sited  facing 

unit should be at ear level to a seated listener. Wall mounted speakers 

inward  either  mounted  on  the  side  walls  of  the 

may be mounted slighter higher with the speaker angled down. Stand 

room or if the room is large, on high stands and 

mounted speakers should be treated as floorstanding speakers except 

with  their  centres  above  ear  level  to  a  seated 

that  the  speaker  may  be  placed  a  little  closer  to  the  back  wall.  Shelf 

listener.

Positioning Passive Loudspeakers

2m-4m

2m

-4

m

>500mm

>200mm

0-30°

400mm

Dolby and the double-D symbol are
 trade marks of Dolby Laboratories. 

Summary of Contents for 1000i SERIES



















Reviews: