background image

Read these instructions. 

 When a cart is used, use caution when moving the cart/ apparatus 
combination to avoid injury from tip-over.

Keep these instructions. 

Unplug this apparatus during lightning storms or when unused for 

Heed all warnings. 

long periods of time.

Important notice to UK users

Follow all instructions. 

Refer all servicing to qualified service personnel. Servicing is required 

The appliance cord is terminated with a UK approved mains plug 

Do not use this apparatus near water. 

when the apparatus has been damaged in any way, such as power 

fitted with a 5A fuse. If 

Clean only with dry cloth. 

supply cord or plug is damaged, liquid has been spilled or objects 

Do not block any ventilation openings. 

have fallen into the apparatus, the apparatus has been exposed to 

Install in accordance with the manufacturer's instructions. 

rain or moisture, does not operate normally, or has been dropped.

Do not install near any heat sources such as radiators, heat registers, 

Warning:

 To reduce the risk of fire or electrical shock, do not expose 

stoves, or other apparatus (including amplifiers) that produce heat. 

this product to rain or moisture. The product must not be exposed to 

Do not defeat the safety purpose of the polarized or grounding type 

dripping and splashing and no object filled with liquids  such as a 

plug. A polarized plug has two blades with one wider than the other. 

vase of flowers  should be placed on the product.

A grounding type plug has two blades and a third grounding prong. 

No naked flame sources  such as candles  should be placed on the 

The wider blade or the third prong are provided for your safety. If the 

product.

provided plug does not fit into your outlet, consult an electrician for 

Warning:

 The mains power switch for the subwoofer is the device 

replacement of the obsolete outlet. 

used to disconnect the unit from the mains supply. This switch is 

Protect the power cord from being walked on or pinched, particularly 

located on the rear panel. To permit free access to this switch, the 

at plugs, convenience receptacles, and the point where they exit 

apparatus must be located in an open area without any obstructions, 

from the apparatus. 

and the switch must be freely operable.

Use only attachments/accessories specified by the manufacturer.

Caution:

 Changes or modifications not expressly approved by the 

Use only with a cart, stand, tripod, bracket, or table 

manufacturer could void the user's authority to operate this device.

specified  by  the  manufacturer,  or  sold  with  the 
apparatus.

main Service Agents for the UK are listed in this manual.

Third parties:

 In the unlikely event that you pass this product on to 

a third party, include these operating instructions with the product.

Service:

 Equipment for sevicing should be returned to the supplying 

dealer, or to the service agent for your area. The addresses of the 

the fuse needs to be replaced, an ASTA or BSI 

approved BS1362 fuse rated at 5A must be used. If you need to 
change the mains plug, remove the fuse and dispose of this plug 
safely immediately after cutting it from the cord.

Connecting a mains plug 

The wires in the mains lead are coloured in accordance with the 
code:  Blue: NEUTRAL;     Brown: LIVE: 
As  these  colours  may  not  correspond  to  the  coloured  markings 
identifying the terminals in your plug, proceed as follows: 

The BLUE wire must be 
connected  to  the 
terminal  marked  with 
the letter N or coloured 
BLUE  or  BLACK.  The 
BROWN  wire  must  be 
connected  to  the 
terminal  marked  with 
the letter L or coloured BROWN or RED. 

CAUTION!

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) 

NO USER-REMOVEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED PERSONNEL

This  symbol  indicates  that  there  are  important  operating  and 
maintenance instructions in the literature accompanying this unit. 

This symbol indicates that dangerous voltage constituting a risk of 
electric shock is present within this unit. 

5A FUSE

BS 1362

BROWN

(Live)

BLUE

(Neutral)

Important Information- Please Read Carefully

Summary of Contents for 1000i SERIES



















Reviews: