background image

Cabinet Care

Q Acoustics loudspeakers are warranted free of defects in materials and 
workmanship as follows:

Clean cabinets with a barely damp cloth. The finish is sealed with a high 
quality  sealant  so  that  in  normal  use  there  is  no  need  to  use  solvent 

Passive Loudspeakers:

 5 years from the date of purchase

based cleaning materials. If the cabinets become stained, remove the 

Active Loudspeakers & Subwoofers:

  2 years from the date of purchase

stain with a cloth lightly moistened with water, white spirit or isopropyl 

During  the  warranty  period  Q  Acoustics  will,  at  its  option,  repair  or 

alcohol depending on the stain. Then lightly buff with a cloth to remove 

replace any product found to be faulty after inspection by the company 

any residue of the cleaning agent. Never use abrasives of any kind.

or its appointed distributor or agent. 

Grilles

Misuse and fair wear and tear are not covered by warranty.

Lightly brush out grilles with a soft brush. Do not remove the speaker 

Goods for repair should in the first instance be returned to the supplying 

grilles unless absolutely necessary.

dealer.  If  this  is  not  possible  the  item/s  should  be  sent  carriage  paid 
preferably  in  the  original  packing,  to  Q  Acoustics  or  their  appointed 

Drive Units. 

distributor  for  your  area  and  accompanied  by  proof  of  purchase. 

Drive units are best left untouched as they are easily damaged when 

Damage sustained by goods in transit to the repair centre is not covered 

exposed.

by  warranty.  Return  carriage  will  be  paid  by  Q  Acoustics  or  their 
distributor as appropriate. 

This warranty does not in any way affect your legal rights.

Appointed Distributor in the UK:

Armour Home Electronics Ltd

Units 7 & 8, Stortford Hall Industrial Park

Bishops Stortford, Herts, UK 

CM23 5GZ

For  service  information  In  other  countries  contact 
[email protected]

Care and Cleaning

Warranty

Summary of Contents for 1000i SERIES



















Reviews: