6.2
Connecting to uPyxis® Desktop App
Connect the ST-600 Series sensor to a Windows computer using either a Bluetooth/USB adapter (P/N: MA-
NEB) or a USB-RS485 adapter (P/N: MA-485) according to the following steps:
1. Plug the Bluetooth/USB adapter or USB-RS485 adapter into a USB port in the computer.
2. Launch
uPyxis®
Desktop App.
3. On
uPyxis®
Desktop App, click Device
→
Connect via USB-Bluetooth
or
Connect via USB-RS485
(Fig-
ure 12).
4. If the connection is successful, the ST-600 Series sensor and its Serial Number (SN) will be displayed
in the left pane of the
uPyxis®
window.
*
NOTE
*
After the sensor and Bluetooth is powered up, it may take up to 10 seconds for the
adapter to establish the wireless signal for communication.
Figure 12.
ST-600 Series User Manual
| +1 (866) 203-8397
13
Summary of Contents for 50219
Page 1: ......
