Python 872 Page 64 Owner'S Manual Download

Page: 64 / 91

Remote Pairing

Prepare the vehicle system to be Paired with a new remote

Open

a door.

Turn

the key to the ON position.

Within 5 seconds

press

and

release

the Control button on the Control Center one time.

Within 5 seconds,

press

and

hold

the Control button on the Control Center. The status LED will flash one

time and the siren then chirps to confirm the vehicle is ready for remote pairing.

Release

the Control button and proceed below.

Note:

If no remote pairing results, the system will exit after 60 seconds.

Prepare the new Responder LE remote to be Paired with the system:

Remote Pair matches your LE remote to the system. Make sure the LE remote is set for the desired Car 1 (Default)

or Car 2 operation for the system it will be paired with.

Press and hold the

AUX

button for 8 seconds.

Note: If Car 2 mode is on, ignore the Car Select beep after 3 seconds

Wait for the Transmit LED to light solid and the remote to beep. Release the

AUX

button.

Press the

AUX

button for 1 second. The transmit LED will blink 3 times and beep 3 times.

Within 5 seconds, press the

AUX

button.

The vehicle siren will chirp and the LED indicators on the remote will light in sequence with sound. You have

now successfully learned the remote to the vehicle remote start and security system.

Press the

AUX

button two times to exit learn routine on the remote. The transmit LED will turn off and exit tone

will sound.

Prepare the vehicle system to be Paired with the companion or a new 1-way remote as described above.

Note: If no remote pairing results, the system will exit after 60 seconds.

Prepare the companion 1-way remote control to be Paired with the system:

Make sure the remote is set for the desired Car 1 (Default) or Car 2 operation for the system it will be paired

with.

Press and hold the

AUX

button for 8 seconds.

Note: If Car 2 mode is on, ignore the Car Select beep after 3 seconds.

Wait for the Transmit LED to light solid and the remote to beep. Release the

AUX

button.

Press the

AUX

button for 1 second. The transmit LED will blink 3 times and beep 3 times.

Within 5 seconds, press the

AUX

button.

The vehicle siren will chirp. You have now successfully learned the remote to the vehicle remote start and

security system.

Press the

AUX

button two times to exit learn routine on the remote. The transmit LED will turn off and exit

tone will sound.

Summary of Contents for 872




























































































Search results

Summary of Contents for 872

Reviews:

Related manuals for 872

Brands by name

Popular brands

Python 872, Owner'S Manual

Search results

Summary of Contents for 872

Reviews:

Related manuals for 872

Brands by name

Popular brands