Python 872 Owner'S Manual Download Page 73

Page: 73 / 91

Zone 4 Sensor Type: sets the Zone 4 (Sensor 2) name to be displayed in the Text Field for Warn-away

and Full Trigger activations

Siren Duration: sets the Full Trigger output duration in 1 second intervals up to 180 seconds.

Aux/Trunk Icon Type: sets the Accessory animation to be displayed on the screen when the Aux/Trunk

output is activated/de-activated

Aux 1 Timed Output: sets the output duration in 1 second intervals up to 90 seconds for Aux 1

Aux 1 Icon Type: sets the Accessory animation to be displayed on the screen when the Aux 1 output is

activated/de-activated

Aux 2 Timed Output: sets the Aux 2 “Timed” output in 1 second intervals up to 90 seconds

Aux 2 Icon Type: sets the Accessory animation to be displayed on the screen when the Aux 2 output is

activated/de-activated

Aux 3 Timed Output: sets the Aux 3 “Timed” output in 1 second intervals up to 90 seconds

Aux 3 Icon Type: sets the Accessory animation to be displayed on the screen when the Aux 3 output is

activated/de-activated

Aux 4 Timed Output: sets the Aux 4 “Timed” output in 1 second intervals up to 90 seconds

10.

Diesel Start Delay Timer: sets the delay before engine crank in 1 second intervals up to 90 seconds for

11.

diesel engine vehicles

Timer Mode Runtime: sets the duration of runtime when the engine is started by the Timer Mode and Smart

12.

Start features

Timer mode Starts: sets the number of times the engine will be started by the Timer Mode and Smart Start

13.

features

Timer mode Intervals: sets the number of hours between engine starts by the Timer Mode and Smart Start

14.

features

Smart Start Low Temperature: sets the low temperature threshold required for Smart Start to start the

15.

engine

Smart Start High Temperature: sets the high temperature threshold required for Smart Start to start the

16.

engine

Smart Start Low battery (Volts): sets the low battery level threshold required for Smart Start to start the

17.

engine

Sensor 1 level: directly sets the sensor level of the on-board shock sensor

18.

Starter Release Fine Tune: adds or subtracts crank time in Tachometer mode in order to overcome engine

19.

types that short crank or over-crank on the first start attempt

Feature Programming: locks and unlocks the user’s ability to enter the feature menus and manually

20.

change the main unit programming using the Control Center

Transmitter Programming: locks and unlocks the user’s ability to enter the remote control/Reset menu and

21.

manually change any functions using the Control Center

Remote Start Runtime: sets the duration of runtime when the engine is started by remote command

22.

VirtualTach Fine tune: adds or subtracts crank time in VirtualTach mode in order to overcome engine types

23.

that short crank or over-crank on the first start attempt

Summary of Contents for 872




























































































Search results

Summary of Contents for 872

Reviews:

Python 872, Owner'S Manual, Page: 73 / 91

Search results

Summary of Contents for 872

Reviews: