background image

17

©   2 0 0 4   d i r e c t e d   e l e c t r o n i c s ,   i n c .

Turning on the ignition key will trip the same two-stage

response as opening a door.

The optional starter kill prevents the vehicle’s starter from

cranking.

multi-level security arming

Multi-Level Security Arming allows you to select which of the

security system's inputs or sensors will be active and which will

be bypassed at the time that the system is armed. (See the 

Table

of Zones

section of this guide.) Pressing 

again within five

seconds of arming the security system will activate the Multi-

Level Security Arming feature. Each time 

is pressed again, a

different security level is selected. The different security levels

can be selected as follows:

Press 

one time: The siren chirps once. The system is

armed.

Press 

a second time within five seconds: The siren

chirps twice followed by a long chirp. Zone 2 is now

bypassed.

Press 

a third time within five seconds: The siren chirps

three times followed by a long chirp. Zone 4 is now

bypassed.  

Press 

a fourth time within five seconds: The siren chirps

four times followed by a long chirp. Zones 2 and 4 are now

bypassed.

Press 

a fifth time within five seconds: The siren chirps

five times followed by a long chirp. All input zones, except

Summary of Contents for 680XP














































Reviews: