Pico-pH-SUB
| Manual
© PyroScience GmbH
12
OPTION 1: OPERATING THE MODULE WITH
PYRO WORKBENCH
For
initial evaluation purposes
the module can be operated with the simple and
customer-friendly software
Pyro Workbench,
which is typically used by end-users. This
software offers comfortable settings and calibration wizards, as well as advanced
logging features. Several modules can be operated in parallel within a single window.
This software requires an encoded USB interface cable
PICO-USB
for connecting the
module to a Windows PC.
3.1
Installing the software Pyro Workbench
System requirements:
PC with Windows 7/8/10 and min. 1000 MB free disk space.
Do not connect the USB-interface cable to your PC before the
Pyro Workbench
software
has been installed. The software will automatically install the appropriate USB-drivers.
Installation steps:
•
Download the
Pyro Workbench
•
unzip and start the installer and follow the instructions
•
connect the interface plug of the USB interface cable to the connector X1 of the
Pico-pH
