Page: 9
5.1.3
Wiring Internal Readers
Up to three readers can be connected to the Home Panel. Each reader needs to be addressed as
described below. These will also need assigning in the Engineer function ‘Assign
Keypads/Readers’.
Addressing at the Reader
Address 1 = SWITCH 1 ON.
Address 2 = SWITCH 2 ON.
Address 3 = SWITCH 1: ON, SWITCH 2: ON.
NOTE
: If using the EURO PROXI as access control/entry control please refer to page: 13.
5.1.4
Wiring External Readers
If an additional external reader is connected, this will need to be assigned in the programming of
‘Assign Keypads/Readers’. Each reader will also need to be addressed individually by connecting certain wires to
the ground.
Addressing at the Reader:
Address 1: Brown, Orange to D1- (Ground)
Address 2: Brown, Green to D1- (Ground)
Address 3: Brown to D1- (Ground)
NOTE
: If using the EURO PROXE as access control/entry control please refer to page: 14.
Summary of Contents for HomeControl+
Page 1: ......
