11
SprayMaster® System User Manual | www.PyranhaInc.com | Houston, Texas
13. Rotate outer ring of clock dial clockwise to set the time of day (Figure 8).
14. Select the pin for the time of day you want the system to operate by using a ballpoint
pen or similar object to move the switch outward into the set position (Figure 8).
Repeat the above for each time you want the system to spray. Spray times should be
set from early morning to
dusk. Your unit is shipped
with the timer set for
six firing times: 6:00am,
8:00am, noon, 4:00pm,
6:00pm and 8:00pm.
15. Set the run duration selector
switch to the length of spray
time desired. When you
are first starting the system,
we recommend setting the
timer to operate six (6)
times a day for 45 seconds
each time. When the area is
under satisfactory control (10 to 14 days), cut back on the number of spray cycles and
duration time to maintain control.
NOTE: System will run continuously when the toggle switch is in the “TEST” position.
System will not operate when the switch is in the “OFF” position the “EXTRA RUN”
button can be used at any time to test the system, or for extra spraying.
CLOSE THE TIMER LID WHEN FINISHED.
PLACE CLOTH COVER OVER THE SYSTEM TOP.
FIGURE 8
System_Manual_2020.indd 11
System_Manual_2020.indd 11
12/23/20 10:18 AM
12/23/20 10:18 AM
