Pylontech Force-H1, Operation Manual

Page: 18 / 43

14
/34
3.
Installation
3.1 Tools
The following tools are required to install the battery pack:
Wire Cutter Crimping Modular Plier Cable Ties
Screw Driver Set Electric Screw Driver
Adjustable Wrench Sleeve Piece 600VDC Multimeter
NOTE
Use properly insulated tools to prevent accidental electric shock or short circuits.
If insulated tools are not available, cover the entire exposed metal surfaces with available
insulated alternatives, except their tips, with electrical tape.
3.2 Safety Gear
It is recommended to wear the following safety gear when dealing with the battery pack
Insulated gloves Safety goggles Safety shoes