background image

10

Protection Symbols

BATTERY 

LOW

CHARGE

FIRST

AC protection: the alarm symbol will be 
displayed on the screen when the 
protection is activated by AC output 
over-current, overload, over-temperature, 
and short circuit.

Please remove the load and tap the 
On/Off button to restore the output 
of cigarette lighter port.

Firstly, please find the cause of the 
trouble and then restart the AC switch. 
If the problem is solved, AC output will 
be restored.

This symbol will be displayed on the 
screen when over-current or short 
circuit protection of the cigarette 
lighter port is activated.

This symbol shows when the 
over-voltage or over-current 
protection is activated during 
charging.

Please check the specifications of the 
charger and figure out whether the 
output voltage matches. Illegal chargers 
may damage the device, or even cause 
fire and other serious consequences.

When the input power of the device 
is lower than the output power and 
the battery is running low, the device 
will shift to the Charge-First mode.

Under this mode, the device will shut down all 
energy output until the battery level goes up to
over 30%, and the DC output will resume. 
However, the AC output still remains closed. 
The AC output must be turned on manually, 
which is a step designed to ensure the safety 
of the user.

When the battery is running low, 
the device will turn off the output 
and display low battery protection 
symbol.

The system will shut down 
automatically after this symbol shows 
for 30 seconds.

Limited to the nature of lithium battery,
when the battery temperature is higher 
than 55˚C or lower than 0˚C, the battery is 
not suitable for charging, the screen will 
display this symbol and charging will be 
interrupted.

Charging will restart as the temperature 
of lithium battery goes back to 3~50˚C.

This symbol shows when the system 
detects hardware failures.

Please turn off the device and contact 
maintenance personnel.

Limited to the nature of lithium battery,
when the battery temperature is higher 
than 60˚C or lower than -15˚C, the battery 
is not suitable for discharging, the screen 
will display this symbol and charging will 
be interrupted.

The device will restart discharging after 
the temperature of lithium battery goes 
back to 0~55˚C.

Symbol                                       Trouble                                                    Troubleshooting

Summary of Contents for amber rock



















Reviews: