13
How to apply lubricant
Lift one side of running belt. Pour some lubricant under the centre of the running belt on the top surface of
the running deck. Run on the treadmill at a slow speed for 3 to 5 minutes to evenly distribute lubricant.
NOTE: DO NOT
over lubricate running deck. Any excess lubricant that comes out should be wiped off.
EMERGENCY STOP
Before beginning a workout session ensure that the Safety Tether Key is properly placed onto the Computer
Console and the Safety Clip is securely attached to an article of your clothing. If you fall the clip will pull out
the
SAFETY TETHER KEY
from the Computer Console and the running belt will stop immediately for
emergency stop, helping to prevent injury.
Replaced the Safety Tether Key onto the Computer Console. Press the
START
button to begin exercise again.
www.PyleUSA.com
Lubricant
1 PC
SAFETY TETHER KEY
