14
BELT ADJUSTMENT
The running belt is pre-adjusted to the running deck at the factory, but after prolonged use it can stretch
and require readjustment. To adjust the belt, turn on the main power switch of the treadmill and let the belt
run at a speed of 8-10 KPH. Use the Allen Wrench provided to turn the rear roller adjustment bolts in order
to centre the belt. If the running belt is shifting to the left, turn the left adjustment bolt 1/4 turn clockwise,
and the running belt should start to correct itself.
If the running belt is shifting to the right, then turn the right adjustment bolt 1/4 turn clockwise, and the
belt should start to correct itself. Keep turning the adjustment bolts until the running belt is properly
centered.
If the running belt is slipping during use, turn off and unplug the treadmill. Using the Allen Wrench provid-
ed, turn both left and right rear roller adjustment bolts 1/4 turn clockwise, then turn the main power switch
back on and run the treadmill at a speed of 8-10 KPH. Run on to the running belt to determine if the belt is
still slipping. Repeat this procedure until the belt no longer slips.
www.PyleUSA.com
Tool:
Allen Wrench
Tool:
Allen Wrench
Tool:
Allen Wrench
