Pyle Pure Clean PUCRC99, User Manual

Page: 8 / 16

3. OPERATION INSTRUCTION
3.2 Cleaning/Stop/Sleep
1.Cleaning
A. Turn on power switch.
B. Press“ ”on unit or press “AUTO“on remote controller to start work.
2. Stop
Stop will switch the cleaning mode to stand-by mode, press related button on remote controller
or " " to stop, after that can be re-operated on unit.
3. Sleep
Please press " " button on remote controller when unit under stand-by mode, then unit will go on
sleep mode. Or if the unit is idle for 1 minute under stand-by mode, the unit will switch to sleep
mode automatically.
*Reminders
If the unit is under sleep mode, press " " or remote controller " " to switch on the unit.
3.3 Cleaning modes selection
1. Auto mode
Clear up the garbage or obstacles in the cleaning area before cleaning. Press the Auto cleaning
button, it will clean by preset spiral, linear, zigzag, follows the wall modes automatically. You can
press the mode button to select the normal or low speed cleaning mode.
6