background image

Electricity-risk of electric shocks / risk of fire!

Never immerse the device in water or other liquids to avoid the risk of electric shock.
Do not use the device if it falls in water.
Do not touch the device with wet hands.
Do not operate it outdoors or in rooms with high humidity.
Store the device only in dry indoor rooms. Do not use the device if it has been
outdoors for a long period of time. In this case, contact our Customer Service
department.
In the event of damage/interference, disconnect the device from the mains
immediately.

PLEASE NOTE:

Acute danger to life from electrocution! Never try to repair an

electrical article yourself; contact your nearest customer service centre/specialist
dealer to ensure your own safety. The same applies to the mains lead. In case of
damage, contact our Customer Service department.
Do not use the device if the cable, plug or any other part of the device is damaged.
Never carry or pull the device with the mains lead; always treat the mains lead with
care. Avoid pinching the cable in doors or pulling it over sharp edges or corners.
Keep the cable away from hot surfaces.
Connect the device only to an plug socket whose mains voltage corresponds to the
data on the rating plate of the device. The mains socket must still be accessible
after the connection has been made.
The device must be switched off when inserting or removing the mains plug.
Remove the mains plug from the mains socket,
1. when the device is not in use,
2. before refilling it with water,
3. before changing the floor cloth,
4. when there is a thunderstorm,
5. before you clean it.
Always pull the plug, never the mains cable, to remove the plug from the mains
socket.
Touch the mains plug only with dry hands.
Use only the appropriate plug.
Do not use any extension cables.
Do not use the device if highly flammable gases are present in the air.

Equipment and device damage

Use the device only when it is completely assembled and the mains cable is
completely unwound. The water reservoir and the filter must be inserted.
In the interests of your own safety, inspect the device for damage every time before
use.
In the event of defects, the device must not be used until it has been repaired by
qualified personnel.
If the mains lead is damaged, it must be replaced in an authorised workshop in
order to avoid danger.

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

2

Summary of Contents for PSTM50













Reviews: