Pyle PIPCAM12, User Manual, Page: 55 / 75

More Security ,More Convenience
- 33
-
1. Login the router.
2. Choose “
Firewall ”, select “ Virtual Servers ”
3. Input the port ( except 80 ) and IP address, then click save.
NOTE : The port and IP address should be the same as Camera.
DLINK:
Figure 7.6
1. Login the router.
2. Choose “
Advanced ”, select “Virtual Servers”
3. Input the port, IP address, Protocol, then click save.
NOTE : The “ public port ” & “ private port ” should be the same as camera’s port, choose the protocol to be
“ both ”.
Figure 7.7
After all these 4 steps done, then you can use the DDNS freely, check the DDNS status from the camera as
below, and get the link of DDNS for internet view.
Step: “ Login ”>” System ”>” Device Info ”: