Pyle PIPCAM12, User Manual, Page: 42 / 75

More Security ,More Convenience
- 20
-
Mode, Bright, Contrast Settings
Figure 4.3
Mode : This is work mode optional, 50HZ/60HZ for the users who use 50HZ/60HZ frequency, outdoor for the
users who want to use this camera to monitor toward outdoor environment
NOTE : This camera normally should be used in a indoor environment
Bright : Set the parameters to adjust the image quality of video. Click to adjust the value
Contrast : Set the parameters to adjust the image quality of video. Click to adjust the value
Default all : Click it to set all the parameters back to factory setting.
NOTE : If you login the camera, there is no video displayed, and the parameter of bright/contrast is blank,
maybe you can try to click “default all” to set the parameters back to factory setting to get live video.
NOTE: For Operator, if you click other menus which operator don’t have the right to operate it, there will be a
pop-up of login interface (Figure 2.6), please input the user name / password for at least 3 times to login again.
2.9 For Administrator
Details see Settings as Administrator (details3.1-3.22).
3 Settings as Administrator
When login as Administrator, you can enter the IP Camera for Administrator.
Administrator supports all the settings and operations of the camera; you can set and control it freely
There are some special functions only for administrator as below: