Pyle Nutrichef PKTEWC180, Manual

Page: 7 / 10

7
SETTING THE TEMPERATURE CONTROL
●
Your wine cooler is equipped with a control panel lock feature which will lock itself automatically 12
seconds after the last time a button is pressed.
●
Push the and button simultaneously for 3 seconds to unlock the control panel. You will hear a
“ BEEP ” sound to alert you that the control is now active.
●
If you desire to change the temperature, set the temperature as you desire by touching the or
button. Touch the button once to select the lower zone and once more to select the upper zone.
The numbers in the display window will flash. The temperature that you desire to set will increase 1ºC
or 1ºF if you touch the button once, on the contrary the temperature will decrease 1ºC or 1ºF if you
touch button once.
●
When you store mostly red wines, the temperature needs to be set at between 14º-18ºC or 57.2º-46.4ºF.
●
When you store mostly white wines, the temperature needs to be set at between 12º-14ºC or 53.6º-39.2ºF.
Note:
●
When you use the wine cooler for the first time or restart the wine cooler after having been shut off for
a long time, there could be a few degrees variance between the temperature you select and the one
indicated on the LCD readout.
●
This is normal and it is due to the length of the activation time. Once the wine cooler is running for a
few hours everything will be back to normal.
Interior Light:
●
You can turn the interior light ON or OFF by pushing the button marked with the “Light” symbol.
●
The light will be turned off automatically if it remains ON for 10 minutes. You have to push the “Light”
button again to turn it back on.
IV. ELECTRIC DIAGRAM
(For PKTEWC08/PKTEWC80/PKTEWC12/PKTEWC120/PKTEWC18/PKTEWC180/PKTECC40 model only)
(For PKTEWCDS1802 and PKTEWCDS1802 model only)
L
E
N
Power Input
BL
WH
GN
POWER SOURCE/
TEMP. CONTROL BOARD
DISPLAY
HEAT SINK FAN
COOLING MODULE
LIGHT & COLD SINK FAN
www.PyleUSA.com