Pyle view PLD10BT, Manual

Page: 12 / 38

-10-
Same functions in any work source mode
1. POWER button and icon
In power off mode, pressing POWER button on remote control or pressing POWER button on
control panel powers on main unit.
In power on mode, long pressing POWER button on control panel or on remote control or touch
icon on source menu powers off main unit.
2. VOL knob & VOL+/VOL- buttons
To adjust volume level, rotate VOL knob on control panel or press or hold VOL+ or VOL- button
on remote control.
3. SEL button
To switch between BASS,TREBLE,BALANCE, FADE,COLOR,BRIGHTNESS,CONTRAST, TINT
and VOLUME, briefly and repeatedly press SEL button.
After switching on the desired mode above, rotate VOL knob or press VOL+/VOL- buttons to set it.
To switch between BT, REG, PI, TA, AF, LOUD, SWF, EQ, DX/LOCAL(in radio mode), STEREO/
MONO(in radio mode), TIME 12H/24H, CLOCK, BUZZ,EUR/USA FREQ,ANIMATION, BG and LED,
long press SEL button to switch on BT, then briefly and repeatedly press SEL button.
After switching on the desired mode above, rotate VOL knob or press VOL+/VOL- buttons to set it.
4. MUTE button
To switch MUTE mode on or off, press MUTE button on remote control or press MUTE button on
control panel.
5. To switch between EQ modes
To select a desired preset EQ mode from JAZZ, CLASSIC, POP, ROCK and USER, press EQ/LOUD
button on remote control continuously.
6. To switch LOUD mode
To switch LOUD mode between ON and OFF, long press EQ/LOUD button on remote control.
7. SW button
To switch SWF between ON and OFF, long press SW button on remote control.
8. CLK button
Press CLK button on remote control to display clock time .
9. OPEN/ or buttons and icon
To slide the monitor holder out and stand it up or into the monitor holder slot(after removing the
monitor), press OPEN/ button on control panel or press button on remote control;
To adjust the angle of the monitor, long press OPEN/ button on control panel or button on
remote control or touch icon on source menu .
10. MODE button and source menu
To switch work source between RADIO, DISC(after inserting a disc), USB(after inserting a USB
storage), CARD(after inserting a card), AUX IN and BT MUSIC, press MODE button on remote
control or press MODE button on control panel continuously.
During disc(non-CD)/USB/card playback, touch screen to pop up Function Icons-board and then
touch the icon in the Function Icons-board to enter the display status of the source menu
before entering Disc/USB/Card mode(refer to Disc/USB/Card Operation) .
During AUX playback, touch screen to pop up AUX interface and then touch icon to enter the
display status of the source menu before entering AUX mode(refer to AUX operation).
In radio
,
BT music or CD mode, touch icon to enter the display status of the source menu
before entering radio
,
BT music or CD mode(refer to Radio Operation, BT Operation and Disc/
USB/Card Operation).